Intercalation of 1,2-Alkanediols into α-Zirconium Hydrogenphosphate

Intercalation compounds of α-Zr(HPO₄)₂ · H₂O with 1,2-alkanediols (from C3 to C16) have been prepared by replacing 1-propanol in α-Zr(HPO₄)₂ · 2C₃H₇OH with the desired 1,2-alkanediols by a treatment in a microwave field. It was found that the intercalates contain 1.5 molecules of diol per formula unit. The diol molecules are placed between the host layers in a bimolecular way with their aliphatic chains tilted at an angle of 51°. The diol molecules are anchored in the interlayer space by H-bonds. A mixed intercalate, containing 1,2-butanediol and 1,2-decanediol in a roughly equimolar ratio, is formed when the α-Zr(HPO₄)₂ · 2C₃H₇OH intercalate, suspended in a mixture of 1,2-butanediol and 1,2-decanediol, is exposed to microwave radiation. No new phase containing both types of the guest molecules was observed when the 1-propanol intercalate, suspended in a mixture of 1-propanol and 1,2-octanediol, is exposed to microwave radiation.     

Chronocoulometric study of the electrochemistry of Prussian blue

During the electrochemical oxidation of Prussian blue (PB) to Prussian yellow (PY), an electrocatalytic oxygen production proceeds at the electrode when aqueous electrolyte solutions are used. The formed oxygen is scavenged by the PY, probably by absorption, and it is consumed during the electrochemical reduction of PY to PB by a heterogeneous chemical reaction of PB with oxygen to PY and hydrogen peroxide. Because of this catalytic regeneration of PY, it is impossible to determine the amount of low-spin iron by chronocoulometry using a potential program in which PB is first oxidized to PY and then the charge is measured to reduce PY to PB. The latter charge is biased by the electrocatalytic PY regeneration.     

An insight into the aromaticity of fullerene anions: experimental evidence for diamagnetic ring currents in the five-membered rings of C(60)(6-) and C(70)(6-)

Reduction of the two "closed" [6,6] methanofullerenes, [6,6]C(61)H(2) (1) and [6,6]C(71)H(2) (5), to the corresponding hexaanions with lithium metal causes the bridgehead-bridgehead bonds to open, at least partially, and this change gives rise to diamagnetic ring currents in the resulting homoconjugated six-membered rings (6-MRs). These new ring currents shield the overlying hydrogen atoms on the methylene bridge and induce upfield shifts of 1.60 and 0.11 ppm in their (1)H NMR resonances, respectively. Analogous reduction of the already "open" [5,6]methanofullerenes, [5,6]C(61)H(2) (2) and [5,6]C(71)H(2) (3 and 4), only slightly enhances the shielding of the hydrogen atoms over the homoconjugated 6-MRs (upfield shifts of 0.13, 0.68, and 0.14 ppm, respectively) but leads to exceptionally strong diamagnetic ring currents in the homoconjugated five- membered rings (5-MRs), as evidenced by dramatic shielding of the hydrogen atoms situated over them (upfield shift of 5.01, 6.78, and 1.63 ppm, respectively). The strongest shielding is seen for the hydrogen atom sitting over the 5-MR at the pole of C(71)H(2)(6)(-) (delta = -0.255 ppm) indicating that the excess charge density is concentrated at the poles.     

Olive mill wastewater treatment by a pilot-scale subsurface horizontal flow (SSF-h) constructed wetland

Performances of a pilot-scale reed bed for the olive mill wastewater (OMW) treatment were investigated, by monitoring influent and effluent pH, total suspended solids (TSS), chemical oxygen demand (COD), total Kjeldahl nitrogen (TKN), total phosphorus and polyphenols. In order to reduce the suspended matter concentration and to avoid clogging, OMW was pre-treated by adding lime putty, calcium hydroxide and hydraulic lime. The best results were obtained with 2 g/L of hydraulic lime. Pre-treated OMW was dosed in the reed bed at dilution ratios of 1/3 and 1/10 (v/v), pointing up that the latter only did not give rise to reed suffering and allowed to obtain good and durable removal efficiencies, above all for COD (74.1+/-17.6%) and polyphenols (83.4+/-17.8%). Recycling of the effluent was quite effective for the improvement of the wastewater quality, allowing a further removal of 26-70%, depending on the parameter taken into account. A post-dosage study, carried out by feeding the reed bed with the effluent of an activated sludge plant, pointed up a rapid decreasing of the outlet concentrations of the investigated parameters to values compatible with Italian regulations concerning wastewater discharge in surface water. Polyphenols were the exception, being their outlet concentration at the end of post-dosage study around 2 mg/L.     

Single electron traps at the surface of polycrystalline MgO: assignment of the main trapping sites

Paramagnetic centers at the surface of ionic oxides in the form of trapped electrons can be generated by exposure of the material to alkali metal or hydrogen atoms or of molecular hydrogen under UV irradiation. For many years, it has been assumed that the resulting paramagnetic centers consist of oxygen vacancies filled by one electron. High-resolution electron spin resonance spectra and ab initio quantum chemical calculations show that the paramagnetic centers consist of (H(+))(e(-)) electron pairs formed at morphological irregularities of the surface. At least three different kinds of (H(+))(e(-)) centers, [A], [B], and [C], have been identified with abundances of 80%, 10%, and 8%, respectively. In this work, we compare a wide set of measured and computed g-factors and hyperfine coupling constants of the unpaired electron with the surrounding (25)Mg, (17)O, and (1)H nuclei and we propose a general assignment of the centers. (H(+))(e(-)) pairs formed at Mg(4c) ions at steps and edges account for species [A], centers formed at Mg(4c) ions at reverse corners correspond to species [B], and species [C] originates from (H(+))(e(-)) pairs formed at Mg(3c) ions at corners and kinks.     

Ion-pair extraction of pentacaine from biological materials

Simple and rapid extraction method for quantitative and selective isolation of the new local anesthetic pentacaine from biological materials is proposed. The technique of ion-pair formation was found to be more effective than usual access using the extraction of the nonionized species. The extraction yield of the unchanged molecule³H-pentacaine after double extraction and single scrubbing was found to be more than 90%. The radiochemical purity was over 90%. The method appears suitable for pharmacokinetic studies in the animal body.     

Density and Sound Velocity Studies of Aqueous Solutions of Tetradecyltrimethylammonium Nitrate at Different Temperatures

The density and ultrasound velocity of aqueous solutions of tetradecyltrimethylammonium nitrate were measured in the temperature range of 15 to 35°C in 5°C intervals. The concentration range covered the premicellar and micellar regimes. By assuming a pseudophase separation model for the micellar system, we applied the densitometric data to estimate the apparent molar volumes and the apparent thermal expansibility coefficients of the surfactant in monomeric and micellar forms. Ultrasound velocity and density data enabled us to estimate the isentropic compressibility of the surfactant in both forms. The results are compared with relevant literature data for alkyltrimethylammonium bromides.     

Possible Mechanisms of Intercalation

Recent knowledge of the kinetics and intercalation mechanisms are summarized and accompanied by examples of intercalation reactions of water and ethanol into anhydrous vanadyl phosphate and redox intercalation of alkali metal cations into vanadyl phosphate dihydrate. Three possible mechanisms of intercalation are presented which are based on: (i) a concept of exfoliation of layers; (ii) the formation of stages and randomly stacked layers; (iii) co-existence of intercalated and non-intercalated parts of crystals of the host separated by an advancing phase boundary. The corresponding kinetic curves are ascribed to mechanisms (ii) and (iii).     

13-Hydroxyacenaphato[1,2-b]quinolizinium bromide as a new flouorescence indicator

13-Hydroxyacenaphtho[1,2-b]quinolizinium bromide (13-HQBr)was selected as a fluorescence indicator to determine basic compounds in non-aqueous media. This compound possesses an acidic phenolic hydroxyl group. It presents varying absorption (ROH, 408, 430 nm; RO(-) 456, 478 nm) and excitation spectra (ROH, 425 nm; RO, 471 nm) depending on the pH of the media, but the same emission fluorescence spectrum (ROH = RO(-), 526 nm) at different pH in buffered aqueous solutions. However, in acidic non-aqueous media (acetic, formic and trifluoroacetic acids), it can be observed that the fluorescence emission spectra differ for the ionized (lambda(em) = 530 nm) and non-ionized (lambda(em) = 440, 470 nm) forms. The fluorescence intensity at the characteristic peaks depends on the acid-base equilibria in the ground and excited states. Therefore, this property could be used to evaluate the concentration of basic compounds, showing a good linearity range between fluorescence intensity and basic sample concentration.     

Quantitative analysis of caffeic acid phenethyl ester in crude propolis by liquid chromatography-electrospray ionization mass spectrometry

Caffeic acid phenethyl ester (CAPE), an active component of propolis from honeybee hives, is known to have antimitogenic, anticarcinogenic, antinflammatory, and immunomodulatory properties. The paper describes a rapid and simple liquid chromatography-electrospray ionisation mass spectrometry method for qualitative and quantitative determination of CAPE. The chromatographic separation was performed with a Luna RP-C18 column using a water-acetonitrile linear gradient. The method was linear over a 0.125-80 ng/mL range (LOD = 62.5 pg/mL). The method was applied for the quantitation of caffeic acid phenethyl ester in crude propolis samples, which were analysed directly after extraction with ethyl acetate solution.